Brake-light/brake-test switches
Two switches are fitted on the brake pedal which supply the following signals:
- S_BLS (Brake-Light Switch)
- S_BLTS (Brake-Light Test Switch)
The DME control module evaluates the signals for the purpose of registering brake operation.
Function
- Model series E38, E39, E46, E53, E6x, E8x:
The brake-light switch connects to ground (B-), the brake-light test switch connects to B+. - Model series E36/7 (Z3):
The brake-light switch and the brake-light test switch connect to B+.
Both signals are checked for plausibility.
The following tables show (depending on the model series) how the status of the brake-light switch/brake-light test switch performs:
Model series E38, E39, E46, E53, E6x, E8x |
Brake pedal not operated |
Brake pedal operated |
Status, brake-light switch |
Closed |
Open |
Status of brake-light test switch |
Open |
Closed |
Model series E36/7 (Z3) |
Brake pedal not operated |
Brake pedal operated |
Status, brake-light switch |
Open |
Closed |
Status of brake-light test switch |
Open |
Closed |
Troubleshooting
If the signals are not plausible in relation to one another, a fault code is stored in the DME control module. Cruise control is deactivated as a result of this fault memory entry.