WDSBMW wiring diagrams
← Back

Diesel particulate filter

For heavy vehicles such as the E60, to comply with the EU4 legislation taking effect as of 2005, a coated diesel particulate filter is necessary.
This diesel particulate filter separates the soot particles in the exhaust gas with high efficiency. (> 95 %). The diesel particulate filter has no influence on the nitrogen oxide (NOx) emissions; these are reduced by measures inside the engine.
The particulate filter system used at BMW requires no maintenance and is designed to last the service life of the vehicle. A fuel additive for filter regeneration is not necessary for BMW vehicles.

The diesel particulate filter is fitted close to the engine and is located behind the oxidation catalytic converter in the underbody of the vehicle.
The filter element consists of a ceramic monolith made of silicon carbide that is resistant to high temperatures. The filter element is 50 % porous and has been given a platinum-based, catalytic coating. This coating ensures that the soot ignition temperature is reduced, thus ensuring good regeneration characteristics of the particulate filter.

The total weight of the diesel particulate filter is approx. 7.5 kg.

Changes for the particulate filter system

For the actual function of the diesel particulate filter, the following changes have been added:

 

Use

The diesel particulate filter is deployed as follows:

 

Functional description, see Vehicle Technology Diagnosis (VTD):

ISTA -> Text search -> Search for the document number

Enter 110105124 or 180203062