WDSBMW wiring diagrams
← Back

Crash-active head restraint

Crash-active head restraint

On triggering, the crash-active head restraint locks the distance between the head restraint and head in order to reduce the load on the cervical vertebrae during a rear-end collision.
(Reason: The distance between the head and head restraint can increase as the result of the individual setting options of the seat.)

Brief description of components

The following components are described:

GR_FB7207014

Index

Explanation

Index

Explanation

A

Crash-active head restraint (not triggered)

B

Crash-active head restraint (triggered)

1

Front section of the head restraint

2

Head restraint support

3

Button for setting the head restraint (depth adjustment)

4

On triggering, max. total path forwards: 60 millimetres

5

On triggering, max. total path upwards: 40 millimetres

6

Mechanical system for setting the head restraint as well as for motion of the head restraint in a triggering sequence

 

If the crash safety module or MRS control module sends a trigger signal, the crash-active head restraint triggers as follows:

 

GR_FB7207016

Index

Explanation

Index

Explanation

1

Front section of the head restraint

2

Springs

3

Release plate

4

Head restraint support

5

Bracket for mounting the head restraint support

6

Bracket for the pyrotechnic component

7

Pyrotechnic component (contains priming cap and propellant charge)

8

Linkage for the headrest adjustment

9

Button for setting the head restraint (depth adjustment)

10

Mechanical system for motion of the head restraint in a triggering sequence

11

Pin (crash-active head restraint triggered)

 

 

 

Note: Deactivation of the crash-active head restraint with shutdown of the passenger airbag

If the optional extra 470 ”ISOFIX child seat fixing” or option 5DA ”Front passenger's airbag deactivation” is installed, the airbags and crash-active head restraint on the passenger's side can be disabled. The switch is operated using the key integrated in the remote control.
In the switch position ”OFF”, the following airbags on the passenger's side are not triggered: Front passenger's airbag and side airbag. The indicator light for passenger airbag deactivation (passenger airbag off light) lights up.

GR_FB7207015

Index

Explanation

Index

Explanation

1

Crash-active head restraint, front left
(designation in the connection scheme: Inflator assembly, front left active head restraint)

2

Crash safety module (ACSM:Advanced Crash Safety Module)
or
MRS control module (MRS: multiple restraint system).

3

Crash-active head restraint, front right
(designation in the connection scheme: Inflator assembly, front right active head restraint

 

 

System functions

The following safety system functions are described:

Notes for Service department

General information

If the crash-active head restraint was triggered, the pyrotechnic component must be replaced (comply with the repair instructions. Designation of the pyrotechnic component in the electronic parts catalogue: gas cartridge).
Only after replacement of the pyrotechnic component can the springs in the head restraint be tensioned again. This means: After activating the crash-active head restraint, the front section of the head restraint can no longer be locked in place. The front section of the head restraint is always pressed forwards by the spring force.

After replacing the pyrotechnic component, clear the fault memory.

 

No liability can be accepted for printing or other faults. Subject to changes of a technical nature