Access to the fuel tank and/or extraction line
Service function 'Access to the fuel tank and/or extraction line'
Every time work is planned on the fuel tank of a BMW Hydrogen 7 vehicle and the vehicle has to be inerted, the service function ”Access to fuel tank and/or extraction line” must be executed.
The function can only be carried out when all of the following conditions have been met:
- Terminal R is switched on.
- There is no H2 high alarm present.
- The gear selector switch is located in position P.
- The electromechanical parking brake is activated.
If any system faults occur, this service function is not aborted!
Operating principle and sequence of the service function:
The function enables access to the fuel tank and/or extraction line. The service function in the diagnosis tester can be used to activate three different request modes:
- Mode A: enables access to the fuel tank.
- Mode B: enables access to the extraction line.
- Mode C: enables access to the fuel tank and extraction line.
Note!
The service function must always be properly terminated after completion of the above-mentioned work on the fuel tank of a BMW Hydrogen 7 vehicle by selecting the test step [2]!