WDSBMW wiring diagrams
← Back

Trailer module and trailer coupling release, functional description

Trailer module and trailer coupling release, functional description

This functional description describes the trailer module for the following vehicles:

The following are also described:

This equipment range is fitted with the optional extra 3AC ”trailer coupling with electrical articulated ball end” in these vehicles.
For a more detailed description of the trailer coupling releases, see: SBT 610804120.

 

The trailer module is an auxiliary control module for the footwell module (E8x, E9x, E7x, R5x) or light module (E6x). At the moment, two different trailer modules are installed. The AHM3 is the version that was deployed up to 09/2006. The AHM3+ is the revised version. Essentially, it differs from the AHM3 with regard to the following characteristics:

The trailer module separates the current circuits of the trailer from the circuit of the towing vehicle. The control module also reports the status of the articulated ball head to the trailer module for the trailer coupling release. These states are: Trailer coupling locked or not locked.

The AHM3+ will be fitted as volume production launch on the E70 and R55. In all the other model series mentioned above, the AHM3+ will be fitted as of 09/ 06.
Observe the following differences with regard to fitting and the function of the trailer module as well as the trailer coupling:

Brief description of components

Alongside a microprocessor, the trailer module consists essentially of overload-resistant sense FET power circuit breakers for the trailer power circuits.

The sense outputs of the power circuit breakers enable monitoring of the power circuits for excess current or wire breaks. The power circuit breakers are activated via CAN messages.

Also implemented is an input for direct activation of the brake light by the brake light power circuit of the towing vehicle (hard-wired). The emergency function guarantees the function of the brake light on failure of the CAN bus.

The following control modules are involved in the functions of the trailer module:

The trailer module detects overvoltage and undervoltage in the vehicle network. Outside the valid range of 9 to 15 Volt, functions that are not relevant to safety are switched off. For example, the trailer coupling release cannot be activated with undervoltage or overvoltage.

 

GR_FB6306009

 

The graphic shows the E90

Index

Explanation

Index

Explanation

1

Device carrier

2

Park Distance Control (PDC)

3

control module for comfort access

4

control module for the trailer coupling release

5

Trailer Module

 

 

 

System functions

The following functions are described:

Trailer lighting

The trailer lighting runs the following functions:

The trailer module activates the individual lamp electrical circuits of the trailer. The implemented functions for the trailer lighting are described in the following section.

Trailer detection

The trailer module detects a trailer as connected when at least two loads (cold measurement) are detected at the lighting outputs. The trailer module then reports the status ”Trailer connected”. This status report is implemented in the towing vehicle in a number of control modules. For example, the Park Distance Control is disabled at the rear.

In vehicles built up to 2006, the reversing light and rear fog light of the towing vehicle are disabled for trailer towing.

In vehicles built after 2006, the reversing light is no longer disabled. If the rear fog light on the trailer fails, there is a switch to the rear fog light of the towing vehicle.

Electrical folding trailer coupling

The electrical folding trailer coupling is a component of the optional extra 'trailer coupling with articulated ball head'. This optional extra has been offered for the E9x since 03/2007. The electrical folding trailer coupling is operated using a button in the luggage compartment.

Fully automatic trailer coupling

The fully automatic trailer coupling is a component of the optional extra 'trailer coupling with articulated ball head'. This optional extra has been offered for the E6x since 03/2007. The fully electric trailer coupling is operated using a button in the luggage compartment.

 

GR_FB6306008

 

The graphic shows the E90

Index

Explanation

Index

Explanation

1

Luggage compartment trim

2

Indicator lamp (LED red and green)

3

Button for the trailer coupling release

 

 

There is a two-colour LED for the indicator lamp in the button. The following signals are possible:

The drive for the trailer coupling release is attached to the release unit. The ball head can only be released if the following conditions have been met:

The trailer coupling can be operated as of terminal 30g ON. The following signal states must be present:

After a successful check of the signal states, the DC motor for the trailer coupling release is activated.

 

GR_FB6306006

 

The graphic shows the E90

Index

Explanation

Index

Explanation

1

Ball head articulated outwards

2

Unlocked intermediate position

3

Ball head articulated inwards

4

Drive for the trailer coupling release

The drive for the trailer coupling release consists of a direct current motor and a reduction gear. The following components are integrated in the release unit:

 

GR_FB6306007

 

The graphic shows the E90

Index

Explanation

Index

Explanation

1

Compression spring

2

Micro-switch

3

Drive disk for the slide

4

Drive shaft

5

Release lever

6

Drive disk for the release lever

7

Slide

8

Reduction gear

9

DC motor

 

 

Notes for Service department

Diagnosis instructions for the trailer module

The trailer module detects and reacts to the following faults:

Notes on trailer coupling release

For a more detailed description of the trailer coupling release, see: SBT 610804120.

Notes on encoding / programming

After installation of a trailer module, the control module must be re-encoded. In doing so, observe the various national versions.

No liability can be accepted for printing or other faults. Subject to changes of a technical nature