Regular sleeping
This document provides an overview of the typical current values that are measured in an external closed-circuit current measurement with a current measuring clip during regular sleeping.
For the procedure of an external closed-circuit current measurement with measurement system, see document <Observing sleeping by means of external closed-circuit current measurement>.
Regular sleeping without additional wakings to check the coolant temperature:

No. |
Time |
Event |
Typical current values |
1 |
0 - 3 min |
Reaching the idle state |
6 to 15 A depending on the equipment. |
|
3 - 8 min |
Vehicle sleeping |
0.4 to 1.5 A depending on the consumer units that are switched on (e.g. map-reading light or glove box light). |
2 |
8 - 9 min |
FRM wakes up the vehicle: Consumer unit shutdown. |
6 to 10 A depending on the equipment. |
|
9 - 30 min or |
Vehicle sleeping |
500 to 650 mA depending on the equipment. |
3 |
30 or 60 min |
Shutdown of terminal 30g |
< 25 mA depending on the equipment. |