WDSBMW wiring diagrams
← Back

Crankcase ventilation: overpressure or underpressure

The combustion pressure presses gases out of the combustion chamber between the cylinder barrel and piston into the crankcase.
So that no overpressure occurs in the crankcase, the underpressure in the air intake system feeds the gases via the crankcase ventilation into the air intake system. The underpressure is limited by a pressure control valve.

Defects in the crankcase ventilation lead to high underpressure or overpressure in the crankcase.

The crankcase ventilation can be checked by measuring the pressure in the crankcase.

Causes of excessive overpressure

Causes of excessive underpressure

Symptoms and consequences of excessive overpressure

Symptoms and consequences of excessive underpressure

Measuring accuracy of the pressure sensor

Target values for petrol engines

The pressure control valve sets the following pressure range:

Deviation to the current ambient pressure 0 to -30 mbar
On N73: 0 to -40 mbar

Component and measuring tolerances result in the following values for a proper state:

Deviation to the current ambient pressure: +20 mbar to -60 mbar
On N73: +20 mbar to -70 mbar

Values in the event of a defect for petrol engines

A defect causes significant deviations from the values for the proper state:

Crankcase ventilation ”clogged”: Ambient pressure +100 mbar

Crankcase ventilation ”defective”: ambient pressure -170 mbar

Note:

Due to the relatively low accuracy of the pressure sensor (± 250 mbar), the ambient pressure must always be determined using the measurement system of the BMW diagnosis system.