WDSBMW wiring diagrams
← Back

Active air flap control

Active air flap control

Active air flap control regulates the air supply for the engine and assemblies cooling system by only opening the radiator shutter as it is needed.

Up to 2 radiator shutters can be installed in the front end.

Conditional on the present design envelope, the engine version and the engine management system, there are the following versions of the air flap control:

The required design envelope for the active air flap control means that it cannot be combined on some models with certain optional extras (e.g. Sports package, active steering or active cruise control). The control system for the lower radiator shutter must be eliminated in some models with turbocharging.

GR_FB1207057

The illustration shows the upper and lower radiator shutter in the E90.

Index

Explanation

Index

Explanation

1

Upper radiator shutter

2

Radiator shutter drive for the upper radiator shutter

3

Front end

4

Lower radiator shutter

5

Electromagnet

 

 

The arrow shows the direction of travel

The engine management system continuously calculates the required cooling output and only opens the radiator shutter when an increased cooling air volume is really required.

GR_FB1207060

Index

Explanation

Index

Explanation

1

Radiator shutter drive and control electronics circuit

2

Electromagnet

3

Engine management system (DME/DDE)

 

 


While the vehicle is being driven, the closed radiator shutter reduces the warm-up phase of the engine, as operating temperature is reached more quickly if the environment is better encapsulated.

The air flow through the radiator creates high aerodynamic drag as the driving speed increases. In higher road speed ranges, the closed radiator shutter improves the aerodynamics. This reduces fuel consumption and thus the emission value.

Components

The following components are described for the air flap control:

Radiator shutter drive unit

The radiator shutter drive is an actuator motor. The radiator shutter drive is connected to an adjustment mechanism. The adjustment mechanism moves the individual fins of the radiator shutter to the relevant position.

The radiator shutter has 2 positions:

GR_FB1207059

The illustration shows the radiator shutter drive on the E90.

Index

Explanation

Index

Explanation

1

Radiator shutter drive unit

 

 


Electromagnet for radiator shutter

The electromagnet has the task of closing the radiator shutter or holding it closed.

GR_FB1207058

The illustration shows the lower radiator shutter in the E60.

Index

Explanation

Index

Explanation

1

Radiator shutter

2

Radiator shutter closed (held in place by the electromagnet being supplied with current)

3

Radiator shutter open (e.g. opened by the air stream)

 

 


System functions

The following system functions are described for the air flap control:

Passive air flap control via electromagnet

The electromagnet is switched on by a switch signal from the control electronics circuit of the radiator shutter drive. The engine management system activates the control electronics circuit.
If there is voltage at the electromagnet, the radiator shutter is closed and held this position.
When power is disconnected from the electromagnet, the radiator shutter opens while the vehicle is being driven due to the air stream. When the vehicle is at a standstill or is moving slowly, the radiator shutter is opened by the air flow of the intake radiator fan.

Active air flap control via actuator motor (radiator shutter drive)

The radiator shutter drive is activated by the DME (Digital Engine Electronics) or DDE (Digital Diesel Electronics) by means of a pulse-width modulated (PWM) signal. The radiator shutter drive is supplied with voltage via terminal 87.

Notes for Service department

If an electrical fault occurs in the air flap control, only the lock of the lower radiator shutter is cancelled (passive air flap control via electromagnet). The radiator shutter drive for the upper radiator shutter (active air flap control via actuator motor) remains in the position it was in when the fault occurred.

The radiator shutter lock is also deactivated if a defect is detected at the coolant-temperature sensor or electric fan.

Warning: Only perform work on the air flap and the air flap control with the engine switched off.

Work may only be carried out on the air flap control system (in particular checking the air flaps for stiff movement) with the engine switched off. There is a risk of injury.

Switch-on conditions

The active and passive air flap control is active as of terminal 15.

The following evaluation criteria are used for the air flap control:

 

No liability can be accepted for printing or other faults. Subject to changes of a technical nature