WDSBMW wiring diagrams
← Back

Programming the seat occupancy mat

Preparation for programming:

Before the service function is run, the following must be executed:

Connect the OPS/OPPS to the cigarette lighter with special cable (BMW Cartool 521010)

Connect the OPS/OPPS via network cable to the network or directly to the diagnosis system

Disconnect the seat occupancy mat. Connect the special cable (from OPS/OPPS) to the seat occupancy mat.

Logically connect the OPS/OPPS with the diagnosis system (OPS/OPPS must not be logically connected to any other device). Switch on terminal 15 (for cigarette lighter)

During programming, make sure that you use a mains adapter (stabilized mains adapter or battery). seat occupancy mat not loaded by person or objects during encoding? Description of the seat occupancy mat:

Description of the seat occupancy mat:

The seat occupancy mat in the USA version is an intelligent system that can detect various states on the front passenger's seat. The following states on the front passenger's seat can be distinguished: