WDSBMW wiring diagrams
← Back

Mechatronics data synchronization for the DKG.

With the service function 'data synchronization mechatronics', transmission data are transferred from the existing mechatronics into the new mechatronics after replacement of the mechatronics.

The service function 'data synchronization mechatronics' must be carried out after the following tasks:

The instructions of the BMW diagnosis system must be followed without fail, as this is the only to ensure a correct operation.

The following environmental conditions must prevail when the data synchronization for mechatronics is carried out:

Sequence of the service function. Sequence 1, replace mechatronics immediately:

Sequence of the service function. Sequence 2, replace mechatronics later:

Note

The transmission data can only be read out or in when the mechatronics are fitted.