WDSBMW wiring diagrams
← Back

Antitheft Alarm System (DWA)

The DWA electronics are integrated in the following control modules:

The DWA electronics evaluate the signals relevant to the alarm system and decide whether the alarm should be triggered. The control module is connected to the data bus K-CAN SYSTEM, across which it receives the signals of the CAS, junction box electronics and footwell module control modules.

In the convertible, an additional separate DWA data bus is connected at the siren with tilt sensor control module. The signals between the DWA electronics and microwave sensors are transferred across this data bus.

DWA alarm activations

The last 10 alarm activations are stored in the DWA alarm memory.

To read out the DWA alarm memory in the function and component selection, select the line ”DWA activations” and start the test module.

Customer complaint - false alarm

Procedure in the event of the customer complaint 'false alarm':