Application of the service functions on the twin-clutch transmission, DKG.
The following service functions must be carried out in each case of replacement or repair.
On replacement of the clutch as well as after all work on the open transmission:
- Oil balancing
- Learn valve characteristic curves
- Clutch adaptation
- Hook test, parking lock
On replacement of the oil pump:
- Oil balancing
- Learn valve characteristic curves
- Clutch adaptation
- Hook test, parking lock
On replacement of the mechatronics:
- Run mechatronics data synchronization. The transmission data of the existing mechatronics are read out and stored after replacement with the new mechatronics.
- Oil balancing
- Learn valve characteristic curves
- Clutch adaptation
- Transmission adaptation
- Hook test, parking lock
On replacement of the transmission (complete):
- Hook test, parking lock
- Oil balancing
On replacement / repair of parking lock cable assembly, selector lever with parking lock unit:
- Hook test, parking lock
On replacement of the DKG combined sensor:
- Oil balancing
- Learn valve characteristic curves
- Clutch adaptation
- Hook test, parking lock
Opening / replacing the oil balancing screw, repair / replacement of the transmission fluid cooler, oil cooler lines, thermostat, water-oil heat exchanger (M3) and seals:
- Oil balancing