Fault patterns: function fault in navigation system Professional 12/06
Functional description, see Vehicle Technology Diagnosis
ISTA -> Text search -> Search for the document number
Enter 840603053
The navigation system Professional (CCC) is a complex control module with a large number of possible fault patterns. The following list shows known symptoms in the functional area CCC audio and navigation. Fault patterns from the functional areas of telephone and Telematic services as well as integrated climate control are not covered in this test module.
Navigation
No. |
Symptom |
|---|---|
401 |
Sporadic fault: navigation fault due to loss of position |
402 |
Frequent navigation faults due to loss of position: |
403 |
No VIA destinations can be entered. |
404 |
TMC information is displayed in such an abbreviated form that some information is invisible. |
405 |
Rerouting planning not possible. |
406 |
Turn-off announcements too late |
407 |
Some house numbers are unavailable or no longer available |
409 |
No positioning after vehicle programming |
411 |
Navigation DVD is not recognized |
412 |
The calculated estimated time of arrival is imprecise or changes frequently. |
General
No. |
Symptom |
|---|---|
001 |
Whistling / grating noises from the CCC. High-frequency whistling, rattling. |
002 |
DVD or CD cannot be played or is not recognized. |
003 |
Problems after replacement of a CCC: |
004 |
Sporadic resets: |
008 |
Position of the track and track time of the CD is not retained. This occurs after a terminal change, after termination of a telephone call or switching the audio source. |
011 |
Navigation DVD label comes loose |
012 |
CCC sporadically does not start up |
016 |
Not possible to change the user interface to the desired language |
018 |
CD / DVD does not eject |
Operation
No. |
Symptom |
|---|---|
101 |
The top left rotary control on the CCC wobbles or hangs off to the side. CCC cannot be properly operated. |
103 |
If the map scale is changed per SVS, this change is not adopted at the controller. |
104 |
Radio control without function |
105 |
Operation of the controller seems sluggish |
106 |
No complete word input of destinations possible per SVS |
107 |
CCC hang up. Operation of the CCC is no longer possible. |
108 |
SVS inputs of letters and numbers using voice are not detected correctly |
113 |
In the SVS, Option <Dynamic Route> (only US vehicles) is missing |
Display
No. |
Symptom |
|---|---|
201 |
Navigation, Japan: shifted navigation screen after programming with Progman V25. No TV picture when changing from the map view to TV. |
203 |
Address book and/or phone numbers are unsorted after software update. |
204 |
Flickering in the display |
205 |
The scale on the map view cannot be set below 100 m |
206 |
Navigation, Japan: NAV/TV screen turns pink. |
207 |
Green TV picture on Asia vehicles |
208 |
In Japanese version of navigation, display language changes to English of its own accord |
209 |
(E70) incorrect screen in the menu ”Seat ventilation/seat heating” in the CID |
210 |
Status bar flashes although CID is switched off |
212 |
Screen misalignment / flickering after programming |
213 |
(R56) Split screen not possible with navigation map |
216 |
On switching over to TV, the navigation map is displayed |
CCC Audio
No. |
Symptom |
|---|---|
302 |
The audio playback does not stop when the vehicle is left and locked. |
303 |
Muting does not work correctly or sometimes disables itself |
304 |
The TP traffic information announcements are regularly output at different volumes. |
308 |
Not all MP3 CDs are played.' |
310 |
Short breaks in all audio sources. |
312 |
Occasional high-frequency whistling noise in the radio mode |
313 |
Display / stations / fault in the tuner JAP / CHK / Oceania |
314 |
Depending on the vehicle electrics and volume, humming noise / buzz with Aux IN |
315 |
AF characteristics of the tuner faulty |
318 |
Poor radio reception after software update with Progman DVD 23.x or 24.x |
321 |
CID E93 Whistling noise during AM radio reception |
Telephone
No. |
Symptom |
|---|---|
501 |
The convenience functions 'call waiting' and 'conference' do not work in CCC vehicles. |
503 |
No change into the active navigation window after a telephone call. |