WDSBMW wiring diagrams
← Back

Left pedestrian protection sensor

Left pedestrian protection sensor

This pedestrian protection sensor is fitted in the bumper on the left.

A number of pedestrian protection sensors are installed in the bumper. The left pedestrian protection sensor is supplemented by the centre pedestrian protection sensor and the right pedestrian protection sensor.
All the sensors are identical components.

The pedestrian protection has the task of detecting an accident situation between a passenger car and a pedestrian and of selectively activating the system depending on certain marginal conditions.
The pedestrian protection is a complete system consisting of pedestrian protection sensors, control module and actuators.

The signals are evaluated in the crash safety module (ACSM).
”ACSM” stands for ”Advanced Crash Safety Module”.
The crash safety module activates the actuators.

Functional description

The left pedestrian protection sensor is an acceleration sensor. The acceleration values picked up by the micro-mechanical acceleration sensor are converted into digital signals and sent in cycles to the crash safety module.

GR_FB6508029

Index

Explanation

Index

Explanation

1

Pedestrian protection sensor

2

2-pin plug-in connection


Structure and inner circuit

The left pedestrian protection sensor consists of:

GR_FB6508026

Index

Explanation

Index

Explanation

1

Longitudinal-acceleration sensor

2

Electronic module


Pin assignments

Pin

Explanation

SIG-

Signal line (-)

SIG+

Signal line (+) and power supply


Target values

The left pedestrian protection sensor is supplied with voltage by the crash safety module (ACSM). Data are transferred across a two-wire connection.

Observe the following target values for the left pedestrian protection sensor:

Variable

Value

Voltage range

5 to 12 V

Measuring range in X direction (longitudinal acceleration)

± 406 g

Temperature range

-40 to 105 °C


Diagnosis instructions

Failure of the component:

If the left pedestrian protection sensor fails, the following behaviour is to be expected:

If one pedestrian protection sensor fails, triggering of the pedestrian protection is ensured by the signals from the remaining intact sensors.
If all the pedestrian protection sensors fail, the function of pedestrian protection is blocked in the crash safety module.

Pedestrian protection only triggers within a defined road speed range. Outside of the defined road speed range, the function is disabled in the crash safety module.

If either no speed message or an incorrect speed message is received for longer than 1 second, the function of the pedestrian protection is disabled in the crash safety module.

No liability can be accepted for printing or other faults. Subject to changes of a technical nature