WDSBMW wiring diagrams
← Back

Front airbag sensor, right

Front airbag sensor, right

The front airbag sensor is installed in the front end of the vehicle on the right side.

The right front airbag sensor and the left front airbag sensor are identical components.

The front airbag sensor supports frontal collision detection. The signals of front airbag sensor are evaluated in addition to the longitudinal acceleration signals to ensure rapid trigger times.
The signals are evaluated in the crash safety module (ACSM).
”ACSM” stands for ”Advanced Crash Safety Module”.

Functional description

The right front airbag sensor is an acceleration sensor. The front airbag sensor detects both acceleration and deceleration (deceleration indicates a head-on collision, acceleration indicates a rear-end collision).
The collision side is detected via the polarity of the sensor signals.

GR_FB6508023

Index

Explanation

Index

Explanation

1

2-pin plug-in connection

2

Front airbag sensor, right


Structure and inner circuit

The front right airbag sensor consists of:

GR_FB6508026

Index

Explanation

Index

Explanation

1

Longitudinal-acceleration sensor

2

Electronic module


Pin assignments

Pin

Explanation

SIG-

Signal line (-)

SIG+

Signal line (+) and power supply


Target values

The right front airbag sensor is supplied with voltage by the crash safety module (ACSM). Data are transferred across a two-wire connection.

Observe the following target values for the front right airbag sensor:

Variable

Value

Voltage range

5.6 to 16 V

Measuring range in X direction (longitudinal acceleration)

± 240 g

Temperature range

-40 to 120 °C


Diagnosis instructions

Failure of the component:

If the front right airbag sensor fails, the following behaviour is to be expected:

No liability can be accepted for printing or other faults. Subject to changes of a technical nature