WDSBMW wiring diagrams
← Back

Airbag sensor, B-pillar right

Airbag sensor, B-pillar right

The right B-pillar airbag sensor is installed in the left B-pillar.

The right B-pillar airbag sensor and left B-pillar airbag sensor are identical components.

The right B-pillar airbag sensor supports frontal collision detection, rear-end collision detection as well as side-impact collision detection.
The signals are evaluated in the crash safety module (ACSM).
”ACSM” stands for ”Advanced Crash Safety Module”.

Functional description

The right B-pillar airbag sensor is an acceleration sensor and a lateral-acceleration sensor. The airbag sensor detects both acceleration and deceleration (deceleration indicates a head-on collision, acceleration indicates a rear-end collision).
The collision side is detected via the polarity of the sensor signals.

GR_FB6508027

Index

Explanation

Index

Explanation

1

2-pin plug-in connection

2

Airbag sensor, B-pillar right


Structure and inner circuit

The right B-pillar airbag sensor consists of:

GR_FB6508025

Index

Explanation

Index

Explanation

1

Longitudinal-acceleration sensor

2

Lateral-acceleration sensor

3

Electronic module

 

 


Pin assignments

Pin

Explanation

SIG-

Signal line (-)

SIG+

Signal line (+) and power supply


Characteristic curve and target values

The right B-pillar airbag sensor is supplied with voltage by the crash safety module (ACSM). Data are transferred across a two-wire connection.

Observe the following target values for the right B-pillar airbag sensor:

Variable

Value

Voltage range

5.6 to 16 V

Measuring range in X direction (longitudinal acceleration)

± 60 g

Measuring range in Y direction (lateral acceleration)

± 120 g

Temperature range

-40 to 105 °C


Diagnosis instructions

Failure of the component:

If the right B-pillar airbag sensor fails, the following behaviour is to be expected:

No liability can be accepted for printing or other faults. Subject to changes of a technical nature