Lumbar support drive for driver and/or passenger
Lumbar support drive for driver and/or passenger
The lumbar support drive supplies the lumbar cushions in the driver's seat or passenger's seat with compressed air.
Functional description
The button for the lumbar-support adjustment is connected via the LIN bus to the driver seat module (SMFA) and/or passenger seat module (SMBF). The seat module evaluates the button signals and, if applicable, activates the lumbar support drive for the driver and/or passenger.
The lumbar support drive consists of a pneumatic pump with pump motor. The pneumatic pump generates the compressed air for the lumbar cushions. The pump motor (DC motor) drives the pump.
A pressure relief valve protects the system against excessive system pressure.

Index |
Explanation |
Index |
Explanation |
|---|---|---|---|
1 |
Pump motor and pump with insulation |
2 |
2-pin plug-in connection |
3 |
Connection for the air duct to the valve block of the lumbar support |
|
|
Structure and inner circuit
The lumbar support drive for the driver and/or passenger is connected by means of a 2-pin plug connection to the driver seat module (SMFA) and/or passenger seat module (SMBF).

Index |
Explanation |
Index |
Explanation |
|---|---|---|---|
1 |
Pump motor |
|
|
Pin assignments
Pin |
Explanation |
|---|---|
U |
Power supply via driver seat module (SMFA) and/or passenger seat module (SMBF) |
Terminal 31L |
Terminal 31, load ground |
Target values
Comply with the following target values for the lumbar support drive for the driver and/or passenger:
Variable |
Value |
|---|---|
Voltage range |
9 to 16 V |
Max. operating pressure |
0.34 bar |
Temperature range |
-40 to 85 °C |
Diagnosis instructions
Failure of the component
If the lumbar support drive for the driver and/or passenger fails, the following behaviour is to be expected:
- Fault memory entry in the driver seat module (SMFA) or passenger seat module (SMBF)
No liability can be accepted for printing or other faults. Subject to changes of a technical nature