Rear compartment fan motor
Rear compartment fan motor
The rear compartment fan is installed in the centre console; it generates an additional air-mass flow for the rear air conditioning/heating. The rear compartment fan consists of the rear compartment fan motor, the fan wheel and the housing. The output stage for the rear compartment fan motor is installed on the housing.
Functional description
At the output stage, the control module of the rear automatic climate control (FKA control module) specifies the voltage for the rear compartment fan motor. The specified voltage is output by the FKA control module as a PWM signal (pulse-width modulated signal) to the output stage.
Depending on this variable control signal, the rear compartment fan motor is activated by the output stage.

Index |
Explanation |
Index |
Explanation |
|---|---|---|---|
1 |
Housing |
2 |
2 fan wheels |
3 |
Rear compartment fan motor |
|
|
Structure and inner circuit
The rear compartment fan motor is an electric motor.

Index |
Explanation |
Index |
Explanation |
|---|---|---|---|
1 |
Rear compartment fan motor |
|
|
Pin assignments
The rear compartment fan motor is connected directly to the output stage.
Pin |
Explanation |
|---|---|
Terminal 31 |
Terminal 31, earth connection for output stage |
U |
Activation of the output stage |
Target values
Observe the following target values for the rear compartment fan motor:
Variable |
Value |
|---|---|
Voltage range |
9 to 16 V |
Maximum current consumption |
15 A |
Temperature range |
-40 to 85 °C |
Diagnosis instructions
Failure of the component
If the rear compartment fan motor fails, the following behaviour is to be expected:
- Rear compartment fan switched off.
General information
If the over-temperature protection of the output stage is triggered, the rear compartment fan motor is switched off.
No liability can be accepted for printing or other faults. Subject to changes of a technical nature