WDSBMW wiring diagrams
← Back

Lumbar support drive for the driver's and/or passenger's side, rear

Lumbar support drive for the driver's and/or passenger's side, rear

The lumbar support drive supplies the lumbar cushions in the rear seats on the driver's and passenger's side with compressed air. The lumbar support drive is installed in the rear seat back.

Functional description

The button for the lumbar-support adjustment is connected via the LIN bus to the seat module on the driver's side, rear (SMFAH) and/or seat module on the passenger's side, rear (SMBFH). The seat module evaluates the button signals and, if applicable, activates the lumbar support drive for the driver's and/or passenger's side, rear.

The lumbar support drive consists of a pneumatic pump with pump motor. The pneumatic pump generates the compressed air for the lumbar cushions. The pump motor (DC motor) drives the pump.
A pressure relief valve protects the system against excessive system pressure.

GR_FB5208055

Index

Explanation

Index

Explanation

1

Insulation

2

Pump with pump motor

3

Pressure relief valve

4

Connection for the air duct to the valve block of the lumbar support

5

3-pin plug-in connection

 

 


Structure and inner circuit

The lumbar support drive for the driver's and/or passenger's side, rear is connected by means of a 3-pin plug connection to the seat module on the driver's side, rear (SMFAH) and/or seat module on the passenger's side, rear (SMBFH).

GR_FB5208014

Index

Explanation

Index

Explanation

1

Pump motor

 

 


Pin assignments

Pin

Explanation

U

Power supply via seat module

Terminal 31L

Terminal 31, load ground

1 pin not used.


Target values

Comply with the following target values for the lumbar support drive for the driver's and/or passenger's side, rear:

Variable

Value

Voltage range

9 to 16 V

Rated current

0.8 A

Maximum current consumption (< 1 minute)

1.6 A

Temperature range

-40 to 85 °C


Diagnosis instructions

Failure of the component

If the lumbar support drive for the driver's and/or passenger's side, rear fails, the following behaviour is to be expected:

No liability can be accepted for printing or other faults. Subject to changes of a technical nature