Energy diagnosis: Terminal control
For more information; see general functional description of the power supply:
Function selection -> Complete vehicle -> Body -> Power supply
Brief description
The power supply for the consumer units is delivered via various terminals. The terminal control is distributed across various control modules:
- Terminal 30:
Continuous +
Terminal 30 is routed from the battery terminal via the safety battery terminal to the front distribution box. As soon as the battery is connected to the terminals, terminal 30 is live.
Control modules supplied by terminal 30:
|
CAS |
Car Access System |
|
DME/DDE |
Digital Engine Electronics /Digital Diesel Electronics |
|
DWA |
Anti-theft alarm system (in the FZD) |
|
EPS |
electromechanical power steering |
|
FRM |
Footwell Module |
|
JBE |
Junction Box Electronics |
- Terminal 30g:
Switched continuous +
Terminal 30g is controlled by the CAS. When the vehicle is wakened by an operation of the user, terminal 30g is switched on. Terminal 30g is switched off automatically after a codable after-run time (e.g. 30 minutes).
As in the case of terminal 15, the CAS activates a relay in the distribution box across a semiconductor switch.
Control modules supplied by terminal 30g:
|
AMP |
Amplifiers |
|
CDC |
CD changer |
|
CID |
Central Information Display |
|
CON |
Controller |
|
CVM |
Convertible top module |
|
DAB/IBOC |
Digital tuner / digital tuner US |
|
DSC |
Dynamic Stability Control |
|
EGS |
Electronic transmission control |
|
IHKA |
Integrated automatic heating and air conditioning system |
|
IHKS |
Integrated heating-air conditioner control |
|
IHR |
Integrated Heater Control |
|
RAD |
Radio |
|
RAD2 |
Radio 2 |
|
RDC |
Tire Pressure Monitor |
|
RLS |
Rain / driving light sensor |
|
SDARS |
Satellite Tuner |
|
SHD |
Slide/tilt sunroof |
|
SZL |
Steering column switch center |
|
ULF-SBX |
Interface box |
|
VM |
Video module |
- Terminal 30g-f:
Cutoff in the event of faults
Terminal 30g-f is a terminal 30 that is only switched off if faults are detected. The JBE controls terminal 30g-f via a bistable relay in the distribution box. The bistable relay can be switched off and on. As a rule, the bi-stable relay is always switched on.
The relay terminal 30g-f is only fitted with High equipment, e.g. when the Car Communication Computer (CCC) was ordered.
Control modules supplied by terminal 30g-f:
|
AHM |
Trailer Module |
|
CA |
Comfort Access |
|
CCC |
Car Communication Computer |
|
KOMBI |
Instrument cluster |
- Terminal 15:
The CAS controls terminal 15 depending on actuation of the start-stop button (with remote control inserted or identification sensor in the insert compartment).
Terminal 15 is activated in the CAS via semiconductor switches. A relay in the distribution box is activated via the output of a semiconductor switch.
control modules supplied by terminal 15:
PDC Park Distance Control
DSC sensor - Terminal R:
The CAS controls terminal R.